Suzuki GT250, GT380, GT550, GT750 Fuel Petrol Tap, Petcock Non Vacuum UK

Description: We are a genuine UK seller with UK stock! Check out our fantastic feedback we sell thousands of fuel taps and we know that you will not find better anywhere else ! This is a NON VACUUM TYPE vacuum tap for the models listed and includes the rubber tank sealing gasket. The original Suzuki part number was 44300-33600 amongst others Please note that this tap does not directly replace the J, K or 72-73 years of any of these bikes. Those years used a different fuel set-up with three fuel outlet pipes. This tap can however be used with a 4 way fuel splitter which we sell separately. See item number 326008296110 Take a good look at your set up before buying this please. FITS YEAR/MAKE/MODEL: 1974-1977 SUZUKI GT380 1974-1977 SUZUKI GT550 1974-1977 SUZUKI GT750 We have posted pictures of the ones we are selling and some original taps for comparison. Note that our tap has the fuel outlet on the right as does the original. The casting of our taps is superb and nobody else is selling these taps Don't mess about trying to reseal your 50 year old original fuel tap. We've tried all that and it just doesn't last. They generally leak through the front or flow fuel continuously which can fill your crankcase with petrol leading to hydro locking. Also the seal kits are very expensive and for some models some of the Suzuki seals are no longer available worldwide. Remember that new old stock seals could actually be 50 years old now! Our taps are as good as you are going to buy, we've searched high and low for a long time for non vacuum taps for these bikes. We check and fettle each tap before dispatch as well as checking for any casting errors or tightness of the tap. These taps are very well made with very good casting material and tolerances, they are not made from 'monkey metal' like lots of other cheap taps are. This will directly fit bikes with only one fuel outlet with connecting pipes between the carburettors. With our brass tee or Y or 4 way fittings these can be used for any bike listed above. * For 44mm Mounting Hole spacing tanks * Connection to fuel line: 6 mminternal diameter pipe required. NOTE This is smaller than the original pipe so you will need to renew your fuel pipe for 6mm internal diameter ethanol compatible or fit an 8mm to 6mm reducer which we sell separately * Vacuum connection: NONE so your existing vacuum pipe should be blanked off with a small bolt and clip * 2 Fibre washers for your 6mm bolts Spare in tank filters are available from us too. Our taps don't have a filter bowl on the bottom but there is an internal mesh filter within the bottom of the tap plus the tank internal syphon pipes also have top filters. There is also a drain screw and sealing washer on the front which can be used to regularly drain the tap and any dirt as part of your servicing and maintenance regime See all of our images. We recommend that you drain down the tank and tap annually, clean the internal filter and fit an inline fuel filter too. We sell those separately. Note that some of the triple carburettors have internal filters fitted too, check those sometime for blockages. Dispatched with 2nd Class tracked 48 parcel postage, if you want it quickly select the 1st class tracked 24 option for only 2 extra Madmopeds

Price: 49.9 GBP

Location: Beccles, Suffolk

End Time: 2024-08-30T11:06:27.000Z

Shipping Cost: 19.03 GBP