JDM Short Stabilizer Links for 20-40mm / 2 "/ 3 " Lifted Suzuki Jimny JB74 JB64

Description: JDM Short Stabilizer Links for 20-40mm / 2 "/ 3 " Lifted Suzuki Jimny JB74 JB64 Description ●Product name: Short Stabilizer LinkPart Number: S00110 Applicable vehicle modelsJimny JB23-5 or later, JB43-3 or later, JB64, JB74 Product Description (Part Number: S00110)It is a stabilizer link which is 30mm shorter than normal. This is a set of left and right links for one vehicle.The link angle of a lifted vehicle can be corrected to make the stabilizer work efficiently and effectively. The sway bar will start working earlier compared to the normal one. The sway bar becomes more effective and roll is suppressed. The shorter sway bar has more clearance from the ground and is less likely to hit obstacles. 20mm to 3 inches up.For a 20 to 40 mm increase, install as-is; for a 2 inch increase, install with a 10 mm sway bar extension block; for a 3 inch increase, install with a 25 mm sway bar extension block.For 2.5” up or more, be sure to use with an extension block.If using a leading arm longer than the stock arm, install the 2“ up arm without modification, and install the 3” up arm with a 10mm sway bar extension block.　*NoteWhen combining with long absorbers, it is necessary to check if there are any interfering parts.If the stabilizer is not properly corrected, the stabilizer will always remain in effect. ●Product Name : Stabilizer Down Spacer 10mmPart Number : S00057 Applicable car modelsJimny JB64, JB74 Product Description (Part Number: S00057)By lowering the installation position by 10mm, it corrects the angle of the stabilizer links on lifted vehicles.This product has the effect of making the stabilizer work more efficiently, reducing the roll (sway) characteristic of the Jimny and at the same time improving the responsiveness from the steering wheel.It is more effective when used in combination with short sway bar links. When used together, please use with vehicles that have been raised 2 inches (50mm).Material: Aluminum. Black anodized aluminum.*Cannot be installed on stock bumpers. ●Product Name : Stabilizer Down Spacer 25mmPart Number : S00058 Applicable car modelsJimny JB64, JB74 Product Description (Part Number: S00058)By lowering the installation position by 25mm, it corrects the angle of the stabilizer links on lifted vehicles.This product has the effect of making the stabilizer work more efficiently, reducing the roll (sway) characteristic of the Jimny and at the same time improving the responsiveness from the steering wheel.It is more effective when used in combination with short stabilizer links. When used with short sway bar links, use with vehicles that have been raised 3 inches (75mm).Material: Aluminum. Black anodized aluminum.*Cannot be installed on stock bumpers. Shipping This item will be shipped by FedEX, DHL, UPS, or EMS. it will change depending on location. Delivery Speed: About 3 - 5 or more working days after shipped. Additional charges may apply for shipping to remote areas. International Buyers - Please Note: Import duties, taxes, and charges aren't included in the item price or postage cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be, prior to bidding or buying. We do not mark the value of goods below the selling price on invoices, or mark goods as "gifts". These are illegal according to Customs regulations.Thank you for your understanding.

Price: 97.8 USD

Location: Shizuoka

End Time: 2024-11-29T14:26:13.000Z

Shipping Cost: 0 USD