1960 35" x 12' MONARCH ENGINE LATHE Model: 2516-20 x 144 Series 80 Dyna Shift

Description: 1960 35" x 12' MONARCH ENGINE LATHE Model: 2516-20 x 144 Series 80 Dyna Shift Please wait for your shipping quote and invoice before sending payment. Buyer is responsible for all rigging and shipping costs. We have riggers and shipping companies we can recommend. Payment is due within 2-3 days of order date via wire transfer, cashiers check or company check (in some cases) or ask about our financing or leasing options. We have been on eBay since 2004 with over 100% 2,300 ratings. If you do need more information or pics etc please ask. EZ Systems Stock # 22170 Location: Lancaster, PA 17601 SpecificationMachine Model No.: 2516-20 x 144 Series 80 Dyna ShiftNew Date: November 1960Swing Over Bed Ways: 35"Swing Over Cross Slide: 19-1/2"Spindle Bore: 3-1/8"Spindle Nose Type: D1-8 CamlockSpindle Speeds: 40 to 1250 RPM(48) Threads: 1/2 to 28 TPI(48) Feeds: 0.0030" to 0.1683 TPRTailstock Quill Diameter: 5-3/4"Tailstock Set Over: 1/2" Each DirectionTailstock Quill Travel: 10"EQUIPPED WITH:Newall Model C80 Two-Axis Digital Readout SystemThread Chasing DialHydraulic Speed Selecting and ShiftingQuick Change Tool Post with Assorted Tool HoldersHydraulic Variable Speed Rapid Traverse to Carriage and Cross SlideInch Graduated Dials on Carriage, Cross Slide and Top CompoundFixed Angle Top Compound for Tracer System – Non-SwivelingGeared Hand Crank Tailstock PositionerBijur One Shot Lubrication System on Carriage and TailstockChuck and Camlock Wrenches(2) 14" Diameter Drive Plates with D8 Camlock Mount(1) 13" Diameter Roller Type Steady Rest(1) 18" Cushman 3 Jaw Chuck with 2 Piece Jaws and Hard Reversible Top Jaws, D8 Mount(1) 21 Cushman 4 Jaw Chuck with 1 Piece Hard Reversible Jaws, D8 Mount(1) #6 MT Dead Center in Headstock, is Removeable(1) Non Removeable Live Center Built Into Tailstock Quill(1) Large Boring Bar Tool Holder, 9" x 10" x 6-1/2" High with 3" Thru HoleFull Length Chip PanHardened and Ground Bed Ways in Good ConditionBuilt in Coolant PumpMicrometer Carriage StopAir Gage Tracer System with Full Length Template Bar – PARTS MISSING30 HP Main Motor, Wired for 3 Phase, 60 Hz, 208/230/460 VoltsPresently Wired for 440 Volt OperationOverall Size: 273" (22.75') x 83" FB x 79" High x 24,000 Lbs.FYI:This machine design has 3 main supporting sections, headstock end, mid machine and tailstock end. They are of cast iron construction with 2 jack screws on the front side and 2 jack screws on the rear side. On the tailstock end only, the rear half of the supporting pad is broken. We have the back piece. The previous owner tried to repair this but was not successful. The front half with the 2 jack screws is good and solid. We are not going to try and repair this. The machine has been test run in our shop and believed to be in good operating order. Questions? Please use this Contact Seller Link here We are part of eBay's beta program which allows you to call us with questions. Use the Contact Seller link above to get to the Find Answers from EZSystems page to get our phone number. Below explains what to do once you are on that page. Warning:Even though we are part of eBay's beta program, when you are using eBay's messaging system do not ask us for our phone number or give us your phone number since this is still against eBay's terms of service. Giving us your phone number via eBay's messaging system can get you / us suspended.

Price: 26900 USD

Location: Lancaster, Pennsylvania

End Time: 2024-08-30T21:12:48.000Z

Shipping Cost: N/A USD